基于连续骨盆轴向CT扫描的上骶段分型
摘要点击次数: 2082   全文下载次数: 1153   投稿时间:2013-08-21    
作者Author单位AddressE-Mail
蔡鸿敏 CAI Hong-min 洛阳正骨医院骨盆外科, 河南 洛阳 471002 Department of Pelvic Surgery, Luoyang Orthopaedic Hospital, Luoyang 471002, Henan, China  
高书图 GAO Shu-tu 洛阳正骨医院骨盆外科, 河南 洛阳 471002 Department of Pelvic Surgery, Luoyang Orthopaedic Hospital, Luoyang 471002, Henan, China  
成传德 CHENG Chuan-de 洛阳正骨医院骨盆外科, 河南 洛阳 471002 Department of Pelvic Surgery, Luoyang Orthopaedic Hospital, Luoyang 471002, Henan, China doc_humane@163.Com 
吴学建 WU Xue-jian 郑州大学第一附属医院骨科, 河南 郑州 450052  
王武超 WANG Wu-chao 洛阳正骨医院骨盆外科, 河南 洛阳 471002 Department of Pelvic Surgery, Luoyang Orthopaedic Hospital, Luoyang 471002, Henan, China  
汤金城 TANG Jin-cheng 洛阳正骨医院骨盆外科, 河南 洛阳 471002 Department of Pelvic Surgery, Luoyang Orthopaedic Hospital, Luoyang 471002, Henan, China  
段卫峰 DUAN Wei-feng 洛阳正骨医院骨盆外科, 河南 洛阳 471002 Department of Pelvic Surgery, Luoyang Orthopaedic Hospital, Luoyang 471002, Henan, China  
张川 ZHANG Chuan 洛阳正骨医院骨盆外科, 河南 洛阳 471002 Department of Pelvic Surgery, Luoyang Orthopaedic Hospital, Luoyang 471002, Henan, China  
期刊信息:《中国骨伤》2014年,第27卷,第10期,第866-869页
DOI:10.3969/j.issn.1003-0034.2014.10.016
基金项目:
中文摘要:

目的:介绍基于连续骨盆轴向CT扫描的上骶段的分型及其意义。

方法:对127例全骨盆2.0 mm层厚轴向扫描图像进行观察,测量S1的平向骶髂螺钉通道,根据平向通道的大小对上骶段进行分型。如平向通道存在且在至少4层扫描图像上其宽度均>7.3 mm,则将其定义为正常型上骶段;如平向通道存在且在扫描层面上其最大宽度≤7.3 mm,则将其定义为过渡型;如平向通道不存在,即在所有扫描层面上其宽度均≤0 mm,则将其定义为变异型。计算各型的例数、百分比及平向螺钉通道的平均值。

结果:正常型58例(45.7%),其平向螺钉通道平均宽度13.9 mm;过渡型42例(33.1%),其平向螺钉通道的平均宽度5.2 mm;变异型27例(21.2%),其平向螺钉通道的平均宽度为0.9 mm.所有病例的上骶段可归属于3型中的1型。

结论:正常型上骶段因存在平向安全通道而可置入平向骶髂螺钉,过渡型及变异型上骶段因无平向通道而无法置入平向骶髂螺钉。过渡型较变异型的优势表现在其标准骶骨侧位像上的有限平向通道可以作为进钉点的选择区域。
【关键词】骨盆骨折  骶髂关节  骶骨  骨折固定术,内  体层摄影术,X线计算机
 
Classification of upper sacral segment based on continuous axial pelvic computed tomography scan
ABSTRACT  

Objectives: To introduce a classification system of upper sacral segment and its significance based on the continuous pelvic axial computed tomography scan.

Methods: The whole pelvis 2.0 mm thick axial scan images of 127 cases were observed,the sacroiliac screw channel of S1 were measured,according to the size of the transverse screw channel the upper sacral segment were classified. Such as transverse screw channel existed and in at least 4 layer scan images its width was > 7.3 mm,it was defined as sacral segment of the normal type. Such as transverse screw channel existed and its maximum width was 7.3 mm or less on scanning level,it was defined as a transitional. Such as transverse channel did not exist,or its width on all scanning level was 0 mm or less,it was defined as dysplastic. Various cases,percentage,and the average of the transverse screw channel were calculated.

Results: There were 58 normal (45.7%),42 transitional (33.1%),and 27 dysplastic (21.2%) upper sacral segments with an averaged width of the tansverse screw channel of 13.9 mm,5.2 mm,and 0.9 mm,respectively. Each specimen could be defined as one of the three types of upper sacral segment without exceptions.

Conclusion: It is possible to insert a transverse iliosacral screw into a normal upper sacral segment when indicated because of the capacious transverse screw channel. The transverse iliosacral screw placement into the transitional and dysplastic upper sacral segments was contraindicated because of the limited or none transverse screw channel. The transitional upper sacral segment was superior to the dysplastic segment due to its starting point location restriction on the true lateral sacral view.
KEY WORDS  Pelvic fracture  Sacroiliac joint  Sacrum  Fracture fixation,internal  Tomography,X-ray computed
 
引用本文,请按以下格式著录参考文献:
中文格式:蔡鸿敏,高书图,成传德,吴学建,王武超,汤金城,段卫峰,张川.基于连续骨盆轴向CT扫描的上骶段分型[J].中国骨伤,2014,27(10):866~869
英文格式:CAI Hong-min,GAO Shu-tu,CHENG Chuan-de,WU Xue-jian,WANG Wu-chao,TANG Jin-cheng,DUAN Wei-feng,ZHANG Chuan.Classification of upper sacral segment based on continuous axial pelvic computed tomography scan[J].zhongguo gu shang / China J Orthop Trauma ,2014,27(10):866~869
阅读全文  下载  查看/发表评论  下载PDF阅读器
关闭




版权所有:《中国骨伤》杂志社京ICP备12048066号-2  版权声明
地址:北京市东直门内南小街甲16号,100700
电话:010-64089487 传真:010-64089792 Email:zggszz@sina.com

京公网安备 11010102004237号