| 切口改良预防腰椎骨折前路手术后侧方成角的临床研究 |
|
摘要点击次数: 1449
全文下载次数: 1045
投稿时间：2018-06-28
|
| 作者 | Author | 单位 | Address | E-Mail |
| 马立泰 |
MA Li-tai |
四川大学华西医院, 四川 成都 610041 |
Department of Orthopaedics, West China Hospital, Sichuan University, Chengdu 610041, China |
|
| 杨毅 |
YANG Yi |
四川大学华西医院, 四川 成都 610041 |
Department of Orthopaedics, West China Hospital, Sichuan University, Chengdu 610041, China |
|
| 刘浩 |
LIU Hao |
四川大学华西医院, 四川 成都 610041 |
Department of Orthopaedics, West China Hospital, Sichuan University, Chengdu 610041, China |
liuhao6304@163.com |
| 王贝宇 |
WANG Bei-yu |
四川大学华西医院, 四川 成都 610041 |
Department of Orthopaedics, West China Hospital, Sichuan University, Chengdu 610041, China |
|
| 邓宇骁 |
DENG Yu-xiao |
四川大学华西医院, 四川 成都 610041 |
Department of Orthopaedics, West China Hospital, Sichuan University, Chengdu 610041, China |
|
| 丁琛 |
DING Chen |
四川大学华西医院, 四川 成都 610041 |
Department of Orthopaedics, West China Hospital, Sichuan University, Chengdu 610041, China |
|
| 龚全 |
GONG Quan |
四川大学华西医院, 四川 成都 610041 |
Department of Orthopaedics, West China Hospital, Sichuan University, Chengdu 610041, China |
|
| 李涛 |
LI Tao |
四川大学华西医院, 四川 成都 610041 |
Department of Orthopaedics, West China Hospital, Sichuan University, Chengdu 610041, China |
|
|
| 期刊信息：《中国骨伤》2018年，第31卷，第11期，第1049-1053页 |
| DOI：10.3969/j.issn.1003-0034.2018.11.013 |
| 基金项目:四川省科技支撑项目（编号：2016FZ0083） |
|
中文摘要:
目的：探讨通过切口改良来预防腰椎骨折前路手术后脊柱侧方的成角。
方法：2016年1月至2017年6月纳入40例在腰椎骨折前路手术患者进行研究，40例中男28例，女12例，年龄27~68（39.5±14.9）岁。高处坠落28例，重物砸伤9例，车祸伤3例。L1椎35例，L2椎4例，L3椎1例。骨折椎体AO分型：全部为A型爆裂骨折。脊髓损伤Frankel分级：A级5例，B级1例，C级10例，D级15例，E级9例。内固定材料全部为ANTERIOR（美敦力公司）。患者分为两组：切口改良组（切口方向和切口平面）和常规切口组。对两组患者手术前后骨折节段的冠状面Cobb角，椎体螺钉与相应终板的夹角进行分析。
结果：切口改良组术前冠状面Cobb角为（1.20±3.26）°，术后为（2.16±3.55）°；常规切口组术前为（1.22±4.42）°，术后为（3.91±3.78）°。两组术前冠状面Cobb角比较差异无统计学意义，术后差异有统计学意义（P=0.017）。切口改良组患者术后没有出现5°以上的侧方成角，而常规切口组出现6例5°~10°的侧方成角，两组患者术后5°以上侧方成角的发生率差异有统计学意义（P=0.010）。近端的2枚椎体螺钉与相应终板的夹角两组比较差异有统计学意义（P<0.05），而远端的2枚椎体螺钉与相应终板的夹角比较差异无统计学意义（P>0.05）。
结论：切口方向和平面的改进可以有效地预防腰椎骨折前路手术术后脊柱侧方成角的发生。 |
| 【关键词】脊柱骨折 侧方成角 手术后并发症 预防 改良切口 |
| |
| Modified incision to prevent the postoperative spinal lateral angulation in surgery via anterior approach for lumbar fracture |
|
ABSTRACT
Objective: To explore a method of modified incision to prevent the postoperative spinal lateral angulation via anterior approach for lumbar fracture.
Methods: A total 40 patients with lumbar fracture from January 2016 to Jun 2017 were internalized in the study. Including 28 males and 12 females, aged from 27 to 68 years with an average of (39.5±14.9) years. Among them, 28 cases caused by high fall, 9 cases by heavy injury, 3 cases by traffic accidents;and 35 fractures were located at L1, 4 at L2, 1 at L3. All the fractures were type A based on AO classification. According to Frankel classify of spinal cord injury, 5 cases were grade A, 1 case was B, 10 cases were C, 15 cases were D, 9 cases were E. The patients were divided randomly into modified incision groups and routine incision groups. All patients were treated with decompression, internal fixation and titanium mesh supported bone graft fusion via anterior approach. All the internal fixation materials were ANTERIOR (Medtronic Inc). Incision direction and incision plane were improved in modified incision groups. The coronal Cobb angle and the angle between the vertebral screw and the corresponding endplate were analyzed before and after operation.
Results: Pre-and post-operative coronal Cobb angles were (1.20±3.26)°, (2.16±3.55)° in modified incision groups and (1.22±4.42)°, (3.91±3.78)° in routine incision groups respectively. And there was no statistical difference before operation, and there was statistical difference after operation between two groups (P=0.017). There was no lateral angulation of more than 5 degrees in modified incision group, but there was lateral angulation of 5 to 10 degrees in routine incision group in 6 cases. The incidence of lateral angulation about 5 degrees after operation was significantly different between two groups (P=0.010). There was significant difference in the angle between the proximal two vertebral screws and the corresponding endplate between two groups (P<0.05), but there was no significant difference in the angle between the distal two vertebral screws and the corresponding endplate (P>0.05).
Conclusion: The improvement of incision direction and plane can effectively prevent the postoperative spinal lateral angulation via anterior approach for lumbar fracture. |
| KEY WORDS Spinal fractures Lateral angulation Postoperative complication Prevention Modified incision |
| |
| 引用本文，请按以下格式著录参考文献： |
| 中文格式: | 马立泰,杨毅,刘浩,王贝宇,邓宇骁,丁琛,龚全,李涛.切口改良预防腰椎骨折前路手术后侧方成角的临床研究[J].中国骨伤,2018,31(11):1049~1053 |
| 英文格式: | MA Li-tai,YANG Yi,LIU Hao,WANG Bei-yu,DENG Yu-xiao,DING Chen,GONG Quan,LI Tao.Modified incision to prevent the postoperative spinal lateral angulation in surgery via anterior approach for lumbar fracture[J].zhongguo gu shang / China J Orthop Trauma ,2018,31(11):1049~1053 |
|
| 阅读全文 下载 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
